Guidelines in Replacing Fascia The first step to take is measuring the old fascia that is currently on the property. You should put the measurements down if you cannot master them in your head. As a result, you will end up purchasing the fascia with the correct measurements. This will also give you easier time as you will not have to go back to the market again after purchasing a small one. Besides that, you will also end up not double spending in purchasing fascia. Apart from that it will also help you in gathering the necessary tools before undertaking the job. The second step is removing the gutters from the old fascia. It will require you to loosen the clips using multi grips to release each section of the gutters. During this process you can also get the opportunity to change the gutters to new styles and colors. And this will give your house a new look.
The Art of Mastering Options
What Research About Cleaning Can Teach You
The next thing that you should do after removing all the gutters is to lift the roofing up off fascia. You should begin this step by removing all the nails from the fascia. The next thing is to push the roofing up and place the timber block in the left gap. Do not forget to remove the gutter brackets. Another thing that you should do is to mark the line where you cut the fascia by finding the closest point from where it has been nailed. This will ensure the part that has not been spoilt is still attached to the roof. This should be followed by cutting away the fascias you are working with in order to replace them. You can do this by cutting the fascia from inside as move upwards from the bottom of the fascia. You can do this using a saw blade. You should note that the blade should be set to the depth of the fascia you are working with. With this you can, therefore, remove the old fascias. Make sure you use the right tool to fully detach them from the roof . You can, therefore, install the new fascias by cutting them to the required sizes. After replacing the knee fascias you should fill any space remains in the joints between new and old fascia. You will achieve this by using filler and then you level it to become uniform with the fascia . Another thing that you should do is to make sure that guttering clips are put back in place and attached to the new fascia. Thefascia can then be painted by using the color of your choice.